Looking for a digital voip service to use with your Cisco/Linksys devices? Click HERE to view our multi-line voice plans and pricing.
This is a guide for the Initial Configuration of the SPA2102/3102
* Please refer to the product manual for additional settings that may be required in your situation *
Step 1
Power off your network devices, including your modem and PC.
Connect an Ethernet Cable from the Ethernet port of the SPA to the Ethernet port of the PC.
Connect an Ethernet Cable from the Internet port of the SPA to the LAN/Ethernet port of the Modem.
Connect your regular handset phone, to the Line port of the SPA2102.
Then power up modem, then the SPA2102 and then the PC.
Launch a web browser from the PC and enter "http://192.168.0.1/advanced" in the URL address bar field.
After these steps you should now have access to the Web Interface page of the SPA2102 to start with the initial configuration.
NOTE: If this is not working or the Browser can't find the page, you may also need to enable the Administration web service.
Dial 7932#, then when prompted press 1 to enable and 1 to confirm
You can also check this information from the Linksys Quick Guide: http://wiki.voip.ms/files/linksys-spa-2102-user-guide.pdf
Step 2
You should now see the web interface of your Linksys/Sipura.
click on the link "Admin", and once the page has reloaded, click again on the link "Advanced View".
Step 3
Under the LINE 1 Tab, Find the following fields and fill them with the following information
Nat Keep Alive: Yes
Nat Mapping/Traversal: Yes
Proxy: (Enter a CLONE LINE server address)
Register Expires: 180 seconds
Proxy Fallback Intvl: 180 seconds
Display Name: John Smith (Replace with your name or company name)
User ID: (Your 10 digit CLONE LINE phone number)
Password: ******** (Your SIP password)
Use DNS SRV: NO
DNS SRV Auto Prefix: NO
Step 4
On the SIP tab, Under NAT Support Parameters, set the following.
Handle VIA received: Yes
Substitute VIA Addr: Yes
Step 5 (Optional)
Optionally, you can configure your adapter with a better dial plan, allowing faster dialing of 10 digits number (Local US/Canada) and also enable 7 digits dialing in one area code of your choice.
At the bottom of Line 1 TAB, you will find a field called Dial Plan
Replace the 555 digits in the following line by the area code of your choice and copy the line, including parenthesis, in the Dialplan field in Line 1 Tab at the bottom of the page:
(911S0|310xxxx|<:1555>[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxxS0|[2-9]xx[2-9]xxxxxxS0|*xx|***xx|*xx.|[3468]11|822|0|00|4xxx|**275*x.|xxxxxxxxxxxx.)
